Dosing Systems

Dosing Systems

Product Details:

X

Product Description

Dosing systems are Skid mounted, compact and rugged, engineered to handle and work efficiently under highly corrosive and varying conditions.

Typical Dosing systems consist of Metering type pumps with varied material of construction to suit the chemical handling. All Dosing Systems can be upgraded to a high level of automation for link up to a localized PLC or client's DCS as required.

Pre-engineered designs conform to international safety norms with respective to spillage and containment.

Chlorine dosing system

Chlorine dosing system for disinfect the water. Chlorine dosing system is based on advanced technology and used to ensure effective dosing of chlorine. This chlorine dosing system is known for its easy installation and requirement of less space for accommodation. Chlorine dosing system doses chlorine into water to make in pure, safe and drinkable for human beings. It is equipped with the sensor which automatically measures the diluted chlorine. This chlorine dosing system is checked under various set industrial parameters.
Sodium Hypochlorite is supplied as a 12.5% solution and is readily available in 30L drums, 200L drums and tanker loads for larger installations.
Calcium hypochlorite is supplied as a 65% strength and readily available in 65 Kgs,100 Kgs drums.
Chemical storage tanks are usually manufactured from polyethylene, MSRL, MSEP, MSFRP. Solution is dosed with solenoid operation dosing pumps or motor driven metering pumps.

Chlorine Dosing System is installed with following components:
  • Single or compartment solution preparation tank
  • Chemical dosing pumps single or multiple
  • Valve’s fittings
  • Interconnecting piping
  • Instruments like pressure gauges
  • Level gauges, level switches
  • PRV
  • Sensors
  • Control panel including interconnecting cabling
Antiscalent dosing system

Antiscalent chemicals are used to prevent the scaling & fouling of the RO membranes. Scale may consist of mineral fouling such as calcium sulfate, calcium carbonate, barium sulfate, silica, calcium fluoride, and strontium sulfate. The Antiscalent dosing should be done before reaching the RO membranes to break up sulfate precipitates, calcium carbonate, and other mineral fouling.
Antiscalent is the preferred pretreatment method for water systems due to its unmatched effectiveness in reducing membrane fouling. Antiscalent is used to process very poor-quality feed water at very high rates of recovery. Without Antiscalent, RO membrane systems would not be as successful serving the water treatment industry.

Features:
  • Effectively control scales
  • Compatible with the leading reverse osmosis (RO) and nanofiltration (NF) membranes
  • RO systems can be run at higher recovery rates, which translates to lower operating costs
Antiscalent Dosing System is installed with following components:
  • Single or compartment solution preparation tank
  • Chemical dosing pumps single or multiple
  • Valve’s fittings
  • Interconnecting piping
  • Instruments like pressure gauges
  • Level gauges, level switches
  • PRV
  • Sensors
  • Control panel including interconnecting cabling

We at Aguapuro, offers wide range of HRSCC for Water & Waste-Water Treatment applications. For Fresh turbid Waters, Clarifier gives better option of treating water.  These systems can also be used for Lime softening to reduce hardness and alkalinity of water.  Even heavy metals and Silica can be reduced when used such systems with use of particular chemicals & optimum dosage.  For Waste-Water applications, these systems are used for reduction of turbidity and suspended solids.

It's the most economical, profitable and conventional proven system for Beverage industries, pharmaceutical industries, Food industries and private sectors.

In ETP/STP, coagulants (Aluminium sulphate, polyelectrolyte, Ferric chloride,) are added to get quick sedimentation in HRSCC. In HRSCC we get 80 to 95% Reduction in Total Suspended Solids and Turbidity.

In WTP, Food grade Commercial or Industrial coagulants are used (Ferrous sulphate, Lime (Calcium Hydroxide, Calcium Hypochlorite, Dolomite, Sodium carbonate) to get better quality of Outlet parameters. i.e., TDS reduction is 30%, Reactive Silica reduction 70%, Hardness reduction 60 to 70%, Turbidity and TSS 70 to 90%.

Treatments Available for :
  • Surface water 
  • Well water 
  • ETP/STP Wastewater

Benefits of HRSCC System :
  • Good quality of Outlet water 
  • Less power Equipments required compared to RO.
  • Easy operation and Maintenance 
  • Less operation cost.
  • No Reject waters from HRSCC
  • Easy treatments for river water

Our Prestigious Clients 
  • Parle Agro 
  • Aquafina 
  • Coca Cola
  • Big Cola 

AGUAPURO EQUIPMENTS PVT. LTD.

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

Listen to the Code(Audio Link)


Back to top
AGUAPURO EQUIPMENTS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.